Many men are dissatisfied with the parameters of their sexual organ and do not want to get out.Therefore, different methods for assistance in making penises thick and long are used.The device as a pump for increasing the member is also widely used.
Principle of operation of the device
Pomp is a cylindrical device.The device is designed to increase human penis in length and width, as well as to increase erection.
The pump acts according to a simple principle.When used around a male penis, pressure appears that helps increase blood flow, full cavernous body with blood.The same thing happens as well as with erection.The penis becomes very difficult, swell, which allows you to increase its parameters.
Sorts of pumps and pumping
Pump for the increase in penis, regardless of the type, has one structure structure.It is a transparent zucchini showing inches.There are also devices that are created by vacuum and the required pressure is maintained.
There are three types of pumps:
- Manual.The vacuum is created using a piston or pear.Such devices have lower costs, so they are often used.However, men must long wait for their use for their use.
- Automatically.In this type of pump, the pressure in the flask is created thanks to the electrical pump, which is already built into the device.The batteries are obliged to insert the batteries for their work.The automatic devices are more desirable because they have high efficiency, allow you to control pressure and absorption.
- Water.Latest type of pump.Varies in that water is used instead of air.Such various increased increased, efficient, has several contraindicates and serves much longer than previous models.
Pompang is done in two ways.First called packing.Its essence is the stretching of the tunatic and increasing penis in length, but not in width.To do this, use a narrow teak in which the penis cannot force on the sides, but will extend upstairs.
Another method is classic pumping.In this case, a wide zucchini is used in which the penis has the opportunity to mitigate in all directions.This allows you to increase the width and length of organs.
During exercises, security precautions must be observed.
Selection criteria
Lover pump is selected considering the size of the penis and the purpose of its use.Experts advise the following:
- The length of the device should be greater than 3 cm.
- The width should be more than 2 cm in diameter.
- For beginners, it is recommended to select the manual type of device, as is the simplest.
The above dimensions of the member are taken into account only in the state of excitement.
In the purchase process, it is worth paying attention to the materials from which increased increased.The zucchini should be strong enough to avoid random harm to male orgur.
Contraindications
It is not allowed to use a vacuum growth of men suffering from the following pathology:
- Thrombosis.
- Fibrosis.
- Liver diseases.
- Kidney disease.
- Diabetes.
- Heart and blood vessel travel.
- Sexually transmitted diseases.
- Dignity in the work of the univertion.
If a man is not sure he can use the pump to increase the length and width of the penis, then it is worth visiting the doctor for questioning.
Pros and Disadvantages
The vacuum pump allows men not only to make your dignity longer and spread.The device also helps to improve the erectile function, extend sexual contact by reducing organ sensitivity.In addition, the device allows you to adjust the penis form, even in the presence of curvature.
The negative pumps are only manifested with their improper use.Failure to comply with the instructions implies a lot of unpleasant consequences.
The effect of use
If you use the pump all the time, after 6 months, the penis will change your size forever.To achieve the maximum effect, it is recommended to take medication that increase the production of sex hormones in men at the same time.But this can be done solely after consulting the doctor.
It is worth knowing that pumps and pumps for increasing penis one and the same.
They are then already tried the pump, keep in mind that they could reach the desired result.Six months later, the length of the penis increases by 3 cm, and thickness - for 2 cm.
Instructions for use
To use the vacuum pump for increasing penis, they do not need special skills.Before the proceedings, the device should be treated with lubrication to ensure sliding.
The male member is needed to lubricate with a special cream, whose performance enables us the normalization of blood flow, improve blood healing on a penis.
Then put the genitals in the cylinder.Eliminate the air from a zucchini to create a vacuum environment.As soon as the redness happens, it is necessary to wait for 30 seconds and run the air.The procedure should last no more than 15-20 minutes.
Possible consequences
No wonder the special instructions for the use of the pump was created.The implementation of all manipulations strictly avoids harmful consequences.But sometimes men ignore the rules.
As a result, instead of desired inches, they receive the following:
- The appearance of a swollen ring at the bottom of the penis head.This happens due to the stagnation of lymphatic liquid.This phenomenon may occur even with the correct use of the vacuum device.If this side effect is noticed, you should stop using the device.
- Swelling of the penis due to the influx of large amount of lymph.
- Aggravating erectile function.
- Redness of the penis, the appearance of bleeding.
- Thrombosis.The disease represents a huge threat to human life, but when used the pump is extremely rare.
So there are no negative consequences, it is important not only to use the pump correctly.It is also necessary to ignore the presence of contraindicates for its application.If so, then you should look for other methods of penis increases.
Domestic devices
For men who do not want to spend money on the purchase of a factory increase, it is possible to make at home with your own hands.
From the cuff pump
To create an air-free environment, you need to promote the cuff pump, turn the cuff back.Then you need to reassemble the device, but already in the reverse order.
Further, you need to make a valve designed to exit the excess air.For this purpose, you can apply the valve from the aquarium compressor.Should be connected to the appropriate hose and sealing.
From the compressor
You can take a compressor from unnecessary cooling equipment.After the evaporator and capacitor extraction, the pipes that are connected to be reduced.Then connect the compressor to the network.
In any car store, take the air filter.Should be attached to the compressor hole.The filter must be connected to the rubber hose required in size.Further, it only remains to try the effect of the device.
The pump helps, but the use of drugs containing testosterone or use of the extender using the pump, gives a higher effect using the pump.
Using syringe
Take a plastic tube, cut three parts, every size of each should be 10 cm.Attach them to Tee.The result is a three bastard tea.
To the central withdrawal for attaching the nose with syringes.On the side twists, install the valves.
It is important that one opens and the other - inside.Not to confuse ourselves in the future, you should draw the arrows that will indicate the direction of the air.
Using plastic bottles
A fairly simple pump for increasing penis can be created from ordinary plastic bottles.It is important to choose a different container size.The one, which is the greater need to cut off the upper part to make the form of the cylinder.
At the bottom of the other bottle, make holes and insert it in the first tank.It is important that a large gap is not formed between the walls.Then you need to fasten the hose into a large bowl.You can perform it from the pump pump pump on the bike.
Caring for the device
In order to maximize the extension of the workership century, it is necessary to take care of it properly.If the device is purchased and has not yet been used, it is necessary to wash thoroughly with soap, then dried and treat with any antiseptic.Then wash the device after each use.
You cannot treat hydrogen peroxide or boiling water, as well as using fat with fats during the lubricant process.Otherwise, the risk of damage is high.